Out of the box, the Leofoto LN-324C made for an intimidating presence. Fully extended, it was clearly as tall as advertised and the weight seemed about right. Looking more closely, all the details looked right. Tearing it down exposed finely machined parts all around and a carbon weave that didn't betray it's "10 layer" claim; the weave was consistent throughout with no waviness or warping of threads and no pitting or cracks in the resin. All of the aluminum bits are finely milled with no tooling marks. Parts that may have originally been cast were finely machined to remove any casting seams and cuts into it were obviously milled. The anodizing is consistent all around and all of the included optional hardware is of similar quality. No flashes, splinters or metal shavings anywhere. Metal on metal contact points showed evidence of lubrication and glided through their movements smoothly.
Went to Discovery Park's West point Lighthouse to observe a confluence of events: king tide, strong wind gusts and gradual clearing of skies. The hope was to get waves crashing near the West Point Lighthouse. Unfortunately, the tide began to recede quickly and by the time the light was good, the waves could no longer reach the point. The result was a bunch of mediocre photos that I decided to use for practice in Lightroom instead. Maybe I can sell a couple of these to a church for use as flyers or book covers or something.
Cold, wet... a lot more rain fell than originally expected when I left the house. It was an absolute mess but Fujifilm proved to me how well they sealed the X-T3. Combined with the 16-55mm ƒ/2.8, the combo remained water-tight in steady wind and rain with no attempt at protection. Because of the weather, I was obviously a bit low on inspiration, but figured I'd post what I got for the sake of others who took part.