Back in the Saddle (Again) and the Return of Pier 62

Volunteered for Kate on a photowalk to the Seattle waterfront recently. After spending the past few months doing lonely portraits to practice using strobes in 1, 2 and 3 light configurations, it felt good to go out and do some of the type of photography I'm most passionate about. So, why did I volunteer and for what? Since Seattle is still under a pandemic lockdown that limits group sizes to 5 people, I chose to help by leading a group so more people could participate via proxy groups. Pier 62 reintroduces a location and perspective that's been missing since it closed for reconstruction. While somewhat pedestrian, the addition of new attractions and changes to the skyline have given it more value when compared with similar locations, both old and new. However, like those other locations, it offers a limited perspective and thus limits its overall value, long term, as a photographic location. It's one that will become over saturated by the end of the summer as a landscape and cityscape destination, even during a time of reduced foot traffic due to the pandemic, but will easily persist as a street, tourist and especially portrait photography location for years to come. Once the new waterfront master plan is completed, Pier 62 could become one of the premium destinations for environmental portraiture and street photography, due to its prime location, identifiable backdrop and potential for high foot traffic.

Finally Bought a Proper Tripod For My GFX 50S

For the past few years, I've been using my Gitzo Series 1 Mountaineer as my primary tripod. It served me well when my primary camera body was the Fujifilm X-T2, X-T3 and X-H1. Once I bought the GFX 50S to use alongside my X-H1, I became acutely aware of the tripod's shortcomings. The Gitzo Mountaineer Series 1 GT1542 is an excellent tripod. Combined with the lightweight Arca-Swiss p0 head, the tripod weighed in at just under 3 lbs and featured a very slim profile when folded down. The 25mm max leg diameter contributed to this slim profile, and while it works well with entry-level DSLRs and mirrorless camera bodies, the slim legs are just a bit too thin for a heavier, professional level body like the GFX 50S. Most people with a larger, heavier camera would be perfectly served with any Gitzo Series 1 tripod, as they only need it for single shots in adequate lighting. In my case, I use it primarily for landscape photography, astrophotography, night photography, etc... situations that require long exposures and/or multiple exposures for stacking, exposure blending or panoramas. This requires greater demands on my tripod as any movement between shots can ruin an exposure. It becomes difficult, if not impossible, to work with multiple, misaligned exposures in post-processing, thus a lighter-weight tripod can cause problems as any flexing will result in misalignment. While I haven't gotten rid of my Series 1 Gitzo, I recently bought a Gitzo GT3542 Series 3 Mountaineer.

STOP THE MADNESS!! Quit Hanging Your Bag From Your Tripod!

I just read another article, this time from DPReview, comparing tripods and the author mentions paying attention to the load capacity so you can safely hang your bag from the hook for more stability. CUT IT OUT!!! STOP HANGING YOUR BAGS FROM YOUR TRIPOD!!! Read on for a better, safer way to stabilize your tripod.

Revisiting the ARCA-Swiss p0 Ball Head After 6 Months

Since buying this head, I've quickly learned to love it, especially after buying the necessary hardware that allows me to invert it as needed. The smooth design, reliability and light weight has helped it find a permanent home atop my Gitzo GT1542 Mountaineer tripod, supplanting the GH1382QD ball head that came with it.

How To: Give Your Gitzo Series 1 Mountaineer 4 Section Tripod Removable Feet

If you didn't already know, the Gitzo Mountaineer Series 0 and 1 Tripods come with fixed rubber feet. I can't speak for the 3 section versions, but generally the Mountaineer Series 2 and up come with 3/8"-16 threaded interchangeable feet, while those below have permanently affixed rubber feet. So I decided to buy a final leg section and foot for the GT1545T Traveler, already knowing it shared the 14.7mm leg diameter with my GT1542 Mountaineer but comes with a threaded cap to support 1/4”-20 interchangeable feet. The part number for the leg section is D106023 and the foot is D108623.

Multi-shot Panoramas.

Single row panoramas have always seemed to thwart me. Either the scene was never appropriate or they wouldn't stitch for one reason or another. After getting the stuff I needed to establish the nodal point on a couple of my lenses, I decided to give it another go from Kerry Park.

My Theory to Selecting the Best Tripod for Your Needs

First, and most importantly, know what genres of photography you enjoy the most and if that genre requires a tripod. Then, buy the largest, highest quality tripod you're willing to carry that fits in your budget. Specifically in that order; do not put budget ahead of any other aspect of the tripod. If you go too cheap, you may very well end up with a tripod that meets none of your needs when you're forced to replace it due to instability or fragility. The adage, "buy cheap, buy twice (or more)" applies here.

Seafair Airshow 2019: US Navy Blue Angels

Shot the Blue Angels performing on Sunday from the top of my condo building. This year, I benefitted from both the autofocus speed of the Fujifilm X-T3 and the reach of the XF 100-400mm ƒ/4.5-5.6 lens. The result was being able to actually see into the cockpits during some of the low passes around downtown. This is also without the 2x teleconverter installed, whose 2 stops of reduced light gathering would have slowed down the shutter speed to being nearly unusable.

Some Deer, Residents of Long Beach

Just a few photos of the local deer on our last morning in Long Beach. They came by for breakfast, the doe bringing her two fawns, approaching our balcony as if she’d remembered that I was out feeding them apples the night before. They sat patiently below our balcony as we dropped bananas and apples for them, posing for photos before moving on to the next set of condos. These deer definitely have us trained well.

Sometimes You Just Have to Go a Different Direction

As much as I like Gitzo as a brand and the quality of their products, some of their stuff just isn't as good as others. Take for example their leveling base; Gitzo features a large lever for tightening a head to the base and a handle borrowed directly from their sister Manfrotto's lineup.

Instead, I got the series 3 leveling base from Really Right Stuff. It's lighter, has a simpler attachment system with no silly lever and a much sleeker locking handle with, get this, a gear hook! That hook alone is almost priceless, allowing me to attach weight for stability when I'm not leveling the head, ending any need to swap back to the flat top base. Back into the box that can go.

I finally have my dream 3 tripod setup

I finally have my dream 3 tripod setup. Gitzo Systematic GT3543LS+GH3382QD, Mountaineer GT1542+GH1382QD, and Traveler GT1555T+GH1382TQD.
Next up is the Gitzo GM2542 Monopod and Mini Traveler Tripod.
I plan to give all of them a thorough shakedown in Long Beach, WA in a couple of weeks and then in the North Cascades the week after.
That is all.

2 Out Of 3, For Now

BMW doesn't make a perfect car. While certain aspects may exceed those of other makers, those others oftentimes exceed that of BMW. Despite that, the Bavarian badge commands respect and with it comes an unmistakable allure for most when they see it. It's a symbol of quality but not necessarily the best and certainly not with all products that display the marque. The Bavarian roundel holds cachet for many and that's something very hard to quantify, an intangible factor that appeals to one's emotion rather than objectivity.

Amazon Strikes Again…

So, just like what happened with the deal on the Gitzo Mountaineer GT1542 + GH1382QD kit, I got a price alert on a Gitzo Traveler GT1555 + GH1382TQD kit for 45% off the advertised price of $989. So I bought it, because I have no self control.

Glazer’s Photowalk: Seacrest Park, and Breaking Old Habits to Create New Ones

Went on another photowalk, this one being a bit more fruitful due to the weather conditions at the start time. Why do I do this to myself? I'm generally asocial and not very talkative, especially around people I don't know, preferring to operate alone. Despite that, it's hard to learn without someone to learn from and it's difficult to be inspired by my coffee table, so I fight my urge to run away for the sake of education and practice. Regarding the setting, while it wasn't ideal for golden hour, the cloudy skies and convergence zone did make for dramatic views and a highly textured backdrop to the humdrum scene. I hit the shutter over 40 times, but the result was less than 15 kept, fewer still that I liked and only 3-4 that I've processed to completion so far.

As for the evening, I took the Doc Maynard from downtown to West Seattle, meeting up with Kate Hailey and the attendees at Marination Ma Kai at Seacrest Dock. Two hours of rambling north, and then west, from the dock to Alki Beach as the sun set in the background behind a small convergence zone. Afterward, I jumped on the ferry back to downtown.

New Toy: Arca-Swiss P0 Ball Head

Some first impressions after picking up an Arca-Swiss P0 Ball Head recently.

Why? It's interesting. It's an inverted design so that the panoramic base is above the ball, ensuring a level platform for panoramic photography. Basically it eliminates the need for a leveling base. Combined with the 9oz weight, it'll reduce as much as 1.5lbs from my systematic tripod setup.

I quickly discovered the reason for the weight savings: the base of the ball head is made of polycarbonate, most likely Delrin. The rest is made from either magnesium or aluminum, depending on the part. Regarding the design, it also has no protruding parts beyond the pano lock lever. The ball lock is performed by a rotating collar around the middle of the body, resulting in a sleek design. The ball is also aspherical, a feature used across Arca-Swiss' whole line, that increases friction to prevent your camera from loosely flopping over when the ball lock is loosened. A very elegant solution to a universal issue with all ball heads.

Create a website or blog at WordPress.com

Up ↑