For the past few years, I've been using my Gitzo Series 1 Mountaineer as my primary tripod. It served me well when my primary camera body was the Fujifilm X-T2, X-T3 and X-H1. Once I bought the GFX 50S to use alongside my X-H1, I became acutely aware of the tripod's shortcomings. The Gitzo Mountaineer Series 1 GT1542 is an excellent tripod. Combined with the lightweight Arca-Swiss p0 head, the tripod weighed in at just under 3 lbs and featured a very slim profile when folded down. The 25mm max leg diameter contributed to this slim profile, and while it works well with entry-level DSLRs and mirrorless camera bodies, the slim legs are just a bit too thin for a heavier, professional level body like the GFX 50S. Most people with a larger, heavier camera would be perfectly served with any Gitzo Series 1 tripod, as they only need it for single shots in adequate lighting. In my case, I use it primarily for landscape photography, astrophotography, night photography, etc... situations that require long exposures and/or multiple exposures for stacking, exposure blending or panoramas. This requires greater demands on my tripod as any movement between shots can ruin an exposure. It becomes difficult, if not impossible, to work with multiple, misaligned exposures in post-processing, thus a lighter-weight tripod can cause problems as any flexing will result in misalignment. While I haven't gotten rid of my Series 1 Gitzo, I recently bought a Gitzo GT3542 Series 3 Mountaineer.
Some first impressions after picking up an Arca-Swiss P0 Ball Head recently. Why? It's interesting. It's an inverted design so that the panoramic base is above the ball, ensuring a level platform for panoramic photography. Basically it eliminates the need for a leveling base. Combined with the 9oz weight, it'll reduce as much as 1.5lbs from my systematic tripod setup. I quickly discovered the reason for the weight savings: the base of the ball head is made of polycarbonate, most likely Delrin. The rest is made from either magnesium or aluminum, depending on the part. Regarding the design, it also has no protruding parts beyond the pano lock lever. The ball lock is performed by a rotating collar around the middle of the body, resulting in a sleek design. The ball is also aspherical, a feature used across Arca-Swiss' whole line, that increases friction to prevent your camera from loosely flopping over when the ball lock is loosened. A very elegant solution to a universal issue with all ball heads.
As promised in my previous blog post, I'm revisiting my thoughts on the Leofoto LN-324C Systematic Carbon Fiber tripod I picked up before going to Forks, WA. The trip gave me my first chance to use the tripod in a real world setting for photos I cared about. After putting the Leofoto LN-324C and LH-40 ball head through the roughest conditions I ever plan to use it in, it has stood up admirably. There are no conditions to this conclusion. It is an excellent tripod, full stop. The value oriented pricing only makes this combo that much more appealing.
After a day's break from the trip to Forks, Craig and I took advantage of a break in the rain to hit Roozengaarde in Skagit to photograph the tulips before the festival began. About half of the tulips were in bloom and the daffodils were still out, though they looked ready to wilt. Fortunately the weather and time of day seemed to keep most people away. This also gave me a chance to use my Leofoto tripod on different terrain. Again, things just happened to work out for us as the rain held off and the clouds helped give the photos a dramatic, almost ominous look that contrasts with the burst of colors below. Too bad the stiff breeze prevented any chance of getting a longer exposure, but that's fine. For tulips, it's all about the colors.
Day 2 at Second Beach. Unfortunately, this time we hit high tide and quickly discovered the beach was a lot less interesting when the tide is in. We managed to make do, despite shooting over 200 shots, again, trying to chase waves that weren't hitting the shore as intensely as they had the day before. At least having my tripod allowed me to get some long exposures as the clouds were moving on shore fast and thick.
Out of the box, the Leofoto LN-324C made for an intimidating presence. Fully extended, it was clearly as tall as advertised and the weight seemed about right. Looking more closely, all the details looked right. Tearing it down exposed finely machined parts all around and a carbon weave that didn't betray it's "10 layer" claim; the weave was consistent throughout with no waviness or warping of threads and no pitting or cracks in the resin. All of the aluminum bits are finely milled with no tooling marks. Parts that may have originally been cast were finely machined to remove any casting seams and cuts into it were obviously milled. The anodizing is consistent all around and all of the included optional hardware is of similar quality. No flashes, splinters or metal shavings anywhere. Metal on metal contact points showed evidence of lubrication and glided through their movements smoothly.