For the past few years, I've been using my Gitzo Series 1 Mountaineer as my primary tripod. It served me well when my primary camera body was the Fujifilm X-T2, X-T3 and X-H1. Once I bought the GFX 50S to use alongside my X-H1, I became acutely aware of the tripod's shortcomings. The Gitzo Mountaineer Series 1 GT1542 is an excellent tripod. Combined with the lightweight Arca-Swiss p0 head, the tripod weighed in at just under 3 lbs and featured a very slim profile when folded down. The 25mm max leg diameter contributed to this slim profile, and while it works well with entry-level DSLRs and mirrorless camera bodies, the slim legs are just a bit too thin for a heavier, professional level body like the GFX 50S. Most people with a larger, heavier camera would be perfectly served with any Gitzo Series 1 tripod, as they only need it for single shots in adequate lighting. In my case, I use it primarily for landscape photography, astrophotography, night photography, etc... situations that require long exposures and/or multiple exposures for stacking, exposure blending or panoramas. This requires greater demands on my tripod as any movement between shots can ruin an exposure. It becomes difficult, if not impossible, to work with multiple, misaligned exposures in post-processing, thus a lighter-weight tripod can cause problems as any flexing will result in misalignment. While I haven't gotten rid of my Series 1 Gitzo, I recently bought a Gitzo GT3542 Series 3 Mountaineer.
Single row panoramas have always seemed to thwart me. Either the scene was never appropriate or they wouldn't stitch for one reason or another. After getting the stuff I needed to establish the nodal point on a couple of my lenses, I decided to give it another go from Kerry Park.
First, and most importantly, know what genres of photography you enjoy the most and if that genre requires a tripod. Then, buy the largest, highest quality tripod you're willing to carry that fits in your budget. Specifically in that order; do not put budget ahead of any other aspect of the tripod. If you go too cheap, you may very well end up with a tripod that meets none of your needs when you're forced to replace it due to instability or fragility. The adage, "buy cheap, buy twice (or more)" applies here.
As much as I like Gitzo as a brand and the quality of their products, some of their stuff just isn't as good as others. Take for example their leveling base; Gitzo features a large lever for tightening a head to the base and a handle borrowed directly from their sister Manfrotto's lineup. Instead, I got the series 3 leveling base from Really Right Stuff. It's lighter, has a simpler attachment system with no silly lever and a much sleeker locking handle with, get this, a gear hook! That hook alone is almost priceless, allowing me to attach weight for stability when I'm not leveling the head, ending any need to swap back to the flat top base. Back into the box that can go.
I finally have my dream 3 tripod setup. Gitzo Systematic GT3543LS+GH3382QD, Mountaineer GT1542+GH1382QD, and Traveler GT1555T+GH1382TQD. Next up is the Gitzo GM2542 Monopod and Mini Traveler Tripod. I plan to give all of them a thorough shakedown in Long Beach, WA in a couple of weeks and then in the North Cascades the week after. That is all.
BMW doesn't make a perfect car. While certain aspects may exceed those of other makers, those others oftentimes exceed that of BMW. Despite that, the Bavarian badge commands respect and with it comes an unmistakable allure for most when they see it. It's a symbol of quality but not necessarily the best and certainly not with all products that display the marque. The Bavarian roundel holds cachet for many and that's something very hard to quantify, an intangible factor that appeals to one's emotion rather than objectivity.
So, just like what happened with the deal on the Gitzo Mountaineer GT1542 + GH1382QD kit, I got a price alert on a Gitzo Traveler GT1555 + GH1382TQD kit for 45% off the advertised price of $989. So I bought it, because I have no self control.
Some first impressions after picking up an Arca-Swiss P0 Ball Head recently. Why? It's interesting. It's an inverted design so that the panoramic base is above the ball, ensuring a level platform for panoramic photography. Basically it eliminates the need for a leveling base. Combined with the 9oz weight, it'll reduce as much as 1.5lbs from my systematic tripod setup. I quickly discovered the reason for the weight savings: the base of the ball head is made of polycarbonate, most likely Delrin. The rest is made from either magnesium or aluminum, depending on the part. Regarding the design, it also has no protruding parts beyond the pano lock lever. The ball lock is performed by a rotating collar around the middle of the body, resulting in a sleek design. The ball is also aspherical, a feature used across Arca-Swiss' whole line, that increases friction to prevent your camera from loosely flopping over when the ball lock is loosened. A very elegant solution to a universal issue with all ball heads.
So, I tore down my Gitzo Mountaineer GT1542 to see what's so special about it. Actually, I do this with every tripod I buy to discover its weaknesses and proper disassembly for maintenance, cleaning, and lubrication. During the process I just happen to take a close look at each part to see how well it's been made, purely out of curiosity. In this case, I was truly interested to see if Manfrotto/Gitzo does anything differently during the manufacturing process that justifies the higher retail price or legendary status.
After the trip to Forks, I realized I needed a mini tripod for those times when I forget my full or travel sized tripod. One that's small enough to carry all of the time and when height isn't all that important compared to just getting the shot. This is one of those things I'll be throwing into the bag whenever I may encounter low light, ensuring I can use whatever shutter speed I need to get proper exposure without fear of instability.
As promised in my previous blog post, I'm revisiting my thoughts on the Leofoto LN-324C Systematic Carbon Fiber tripod I picked up before going to Forks, WA. The trip gave me my first chance to use the tripod in a real world setting for photos I cared about. After putting the Leofoto LN-324C and LH-40 ball head through the roughest conditions I ever plan to use it in, it has stood up admirably. There are no conditions to this conclusion. It is an excellent tripod, full stop. The value oriented pricing only makes this combo that much more appealing.
After a day's break from the trip to Forks, Craig and I took advantage of a break in the rain to hit Roozengaarde in Skagit to photograph the tulips before the festival began. About half of the tulips were in bloom and the daffodils were still out, though they looked ready to wilt. Fortunately the weather and time of day seemed to keep most people away. This also gave me a chance to use my Leofoto tripod on different terrain. Again, things just happened to work out for us as the rain held off and the clouds helped give the photos a dramatic, almost ominous look that contrasts with the burst of colors below. Too bad the stiff breeze prevented any chance of getting a longer exposure, but that's fine. For tulips, it's all about the colors.
Out of the box, the Leofoto LN-324C made for an intimidating presence. Fully extended, it was clearly as tall as advertised and the weight seemed about right. Looking more closely, all the details looked right. Tearing it down exposed finely machined parts all around and a carbon weave that didn't betray it's "10 layer" claim; the weave was consistent throughout with no waviness or warping of threads and no pitting or cracks in the resin. All of the aluminum bits are finely milled with no tooling marks. Parts that may have originally been cast were finely machined to remove any casting seams and cuts into it were obviously milled. The anodizing is consistent all around and all of the included optional hardware is of similar quality. No flashes, splinters or metal shavings anywhere. Metal on metal contact points showed evidence of lubrication and glided through their movements smoothly.
The first three were taken before the penumbra even reached the moon. The weather had just begun to clear but a few clouds still managed to cross the sky before clearing moments before the Earth's penumbra began to cast itself upon the moon's surface. The full moon's glow and reflection on the passing clouds created an eerie look that was just too good to not photograph. All three were bracketed shots but the second is an HDR stacked in Lightroom. The first and third were fully recoverable from single images at the proper exposure.
I've been acquiring more and more stuff to support my photography over the past summer and, since my last flatlay photo was taken back in May, I thought I'd update the image with all of the new gear I've acquired. This is limited to just my Fujifilm bodies and glass. There's far more laying around in support of this, from bags to filters to tripods and everything else in between. At least I've hit a plateau, now owning all but 1 or 2 lenses on my list, transitioning to the acquisition of the filters and platforms I need to support my work.