So here we are. As promised at the end my GF 80mm ƒ/1.7 lens review, I've received the Fujifilm Instax Share SP-3 printer and 8 film packs totaling 80 exposures. I've never owned or printed using Instax so I decided to use one pack of film to print a full spectrum of recent shots; a couple of portraits with 2 printed directly from the camera, monochrome, vivid color, high contrast, golden hour and my personal processing style. I wanted to get a good feel for the film's dynamic range, color, contrast and sharpness. While the film is traditional instant pack film, the printer works by projecting the image on an 800 x 800 dot, micro-OLED display that exposes the film, basically a digital form of the optical projection used to expose pack film in a traditional Polaroid Land camera. Because it's not fully optical and the micro-OLED is so, uh, micro, I wanted to see how far I could stretch it so I can make adjustments to my shooting style for the best results.
Thanks to Glazer's Camera here in Seattle, I was able to get my hands on the fujifilm GF 80mm ƒ/1.7R WR on release day. Since then, the weather's been shit, so I haven't been able to test it. I have been able to take some sample shots in my home, running all the way through its ƒ/1.7 to ƒ/22 aperture range and from minimum focusing distance to infinity. I've also shot it with both of my macro tubes, for shits and grins. The 80mm was a lens GFX owners have been screaming for for years now. It's a common focal length in medium format portraiture and one of the most common focal lengths you'll see if ever shopping for a medium format film camera. It's odd Fujifilm has chosen to ignore it for as long as they have and I'm assuming it's due to some internal strife over how it should have been engineered... a fight between ultimate resolution versus ultimate character. In the end, they seem to have landed on a mix of both and you'll see why as you read this review.