First, and most importantly, know what genres of photography you enjoy the most and if that genre requires a tripod. Then, buy the largest, highest quality tripod you're willing to carry that fits in your budget. Specifically in that order; do not put budget ahead of any other aspect of the tripod. If you go too cheap, you may very well end up with a tripod that meets none of your needs when you're forced to replace it due to instability or fragility. The adage, "buy cheap, buy twice (or more)" applies here.
Out of the box, the Leofoto LN-324C made for an intimidating presence. Fully extended, it was clearly as tall as advertised and the weight seemed about right. Looking more closely, all the details looked right. Tearing it down exposed finely machined parts all around and a carbon weave that didn't betray it's "10 layer" claim; the weave was consistent throughout with no waviness or warping of threads and no pitting or cracks in the resin. All of the aluminum bits are finely milled with no tooling marks. Parts that may have originally been cast were finely machined to remove any casting seams and cuts into it were obviously milled. The anodizing is consistent all around and all of the included optional hardware is of similar quality. No flashes, splinters or metal shavings anywhere. Metal on metal contact points showed evidence of lubrication and glided through their movements smoothly.
My B2 ball head has had an issue with drift since purchase, and after months of dealing with it, I felt it was now time to finally fix the issue. The G2 a high quality, low profile ball head with huge capacity and smooth action that punches well above its weight. It compares favorably against more well-known name brands even if you take out price as a factor.
So I had this vision in mind: I wanted to get a photo of the Space Needle superimposed on Mt. Rainier. Now that I have the 100-400mm ƒ/4.5-5.6 lens from Fujifilm, I'm able to get this shot... if it's even possible. I've seen others who've composited the Space Needle onto a photo of Mt. Rainier, or Mt. Baker, and even Mt. Hood (uh, wtf?) and the results always look less than stellar, mostly because I've lived here most of my life and I know those shots weren't possible using the angles they'd chosen of either object. I wanted to do this for real, all in camera, so I consulted a map and looked around Queen Anne hill and settled on Bhy Kracke Park.
So, if you read my previous gear review on the Manfrotto BeFree Compact Carbon Travel Tripod, you'll understand that I needed to replace that turd quickly. This time choosing not to ignore my better judgment, I decided to give the Benro Slim Carbon Travel Tripod (TSL08CN00) a shot. This will be the third Benro tripod I've bought with my own money and while the ProAngel didn't work out after a couple of months of use, my Adventure Series 2 Carbon has held up quite well.
My purchase of the Benro Adventure 2 Carbon required me to consider a compact tripod, the Benro ProAngel 1. Here's my review of it.