Single row panoramas have always seemed to thwart me. Either the scene was never appropriate or they wouldn't stitch for one reason or another. After getting the stuff I needed to establish the nodal point on a couple of my lenses, I decided to give it another go from Kerry Park.
Out of the box, the Leofoto LN-324C made for an intimidating presence. Fully extended, it was clearly as tall as advertised and the weight seemed about right. Looking more closely, all the details looked right. Tearing it down exposed finely machined parts all around and a carbon weave that didn't betray it's "10 layer" claim; the weave was consistent throughout with no waviness or warping of threads and no pitting or cracks in the resin. All of the aluminum bits are finely milled with no tooling marks. Parts that may have originally been cast were finely machined to remove any casting seams and cuts into it were obviously milled. The anodizing is consistent all around and all of the included optional hardware is of similar quality. No flashes, splinters or metal shavings anywhere. Metal on metal contact points showed evidence of lubrication and glided through their movements smoothly.
Cold, wet... a lot more rain fell than originally expected when I left the house. It was an absolute mess but Fujifilm proved to me how well they sealed the X-T3. Combined with the 16-55mm ƒ/2.8, the combo remained water-tight in steady wind and rain with no attempt at protection. Because of the weather, I was obviously a bit low on inspiration, but figured I'd post what I got for the sake of others who took part.
finally went out to take some photos since the Alaskan Way Viaduct is closing for good this weekend. i ended up hitting the Pier 66 Rooftop Park at sunset then moved back to the Pike Place Marketfront location above the viaduct. finally, i went through Post Alley on the way home. oddly, it was through Post Alley that inspired the shot i liked the most from the set.
So I've revisited a few photos from the past year and applied what I've learned in Lightroom since then. The hope was to take what I felt were good photos and try to make them better, possibly even worth printing, since I liked the views.
I've been acquiring more and more stuff to support my photography over the past summer and, since my last flatlay photo was taken back in May, I thought I'd update the image with all of the new gear I've acquired. This is limited to just my Fujifilm bodies and glass. There's far more laying around in support of this, from bags to filters to tripods and everything else in between. At least I've hit a plateau, now owning all but 1 or 2 lenses on my list, transitioning to the acquisition of the filters and platforms I need to support my work.
So I had this vision in mind: I wanted to get a photo of the Space Needle superimposed on Mt. Rainier. Now that I have the 100-400mm ƒ/4.5-5.6 lens from Fujifilm, I'm able to get this shot... if it's even possible. I've seen others who've composited the Space Needle onto a photo of Mt. Rainier, or Mt. Baker, and even Mt. Hood (uh, wtf?) and the results always look less than stellar, mostly because I've lived here most of my life and I know those shots weren't possible using the angles they'd chosen of either object. I wanted to do this for real, all in camera, so I consulted a map and looked around Queen Anne hill and settled on Bhy Kracke Park.
I went out early on Friday morning to take photos of downtown from Kerry Park and was greeted by wildfire smoke blotting out the sunrise. All attempts to capture a golden sunrise on what was essentially a cloudless morning were thwarted, so I popped on the 50-140mm and 2x teleconverter and aimed the front element at the Space Needle. After spending nearly a year under an ugly veil while undergoing renovation, the scaffolding came off a few days ago and revealed the new, modern look. So, in spite of it all, I ended up getting some clean shots of the Space Needle's new look.