I just read another article, this time from DPReview, comparing tripods and the author mentions paying attention to the load capacity so you can safely hang your bag from the hook for more stability. CUT IT OUT!!! STOP HANGING YOUR BAGS FROM YOUR TRIPOD!!! Read on for a better, safer way to stabilize your tripod.
Since buying this head, I've quickly learned to love it, especially after buying the necessary hardware that allows me to invert it as needed. The smooth design, reliability and light weight has helped it find a permanent home atop my Gitzo GT1542 Mountaineer tripod, supplanting the GH1382QD ball head that came with it.
If you didn't already know, the Gitzo Mountaineer Series 0 and 1 Tripods come with fixed rubber feet. I can't speak for the 3 section versions, but generally the Mountaineer Series 2 and up come with 3/8"-16 threaded interchangeable feet, while those below have permanently affixed rubber feet. So I decided to buy a final leg section and foot for the GT1545T Traveler, already knowing it shared the 14.7mm leg diameter with my GT1542 Mountaineer but comes with a threaded cap to support 1/4”-20 interchangeable feet. The part number for the leg section is D106023 and the foot is D108623.
First, and most importantly, know what genres of photography you enjoy the most and if that genre requires a tripod. Then, buy the largest, highest quality tripod you're willing to carry that fits in your budget. Specifically in that order; do not put budget ahead of any other aspect of the tripod. If you go too cheap, you may very well end up with a tripod that meets none of your needs when you're forced to replace it due to instability or fragility. The adage, "buy cheap, buy twice (or more)" applies here.
Just a few photos of the local deer on our last morning in Long Beach. They came by for breakfast, the doe bringing her two fawns, approaching our balcony as if she’d remembered that I was out feeding them apples the night before. They sat patiently below our balcony as we dropped bananas and apples for them, posing for photos before moving on to the next set of condos. These deer definitely have us trained well.
I finally have my dream 3 tripod setup. Gitzo Systematic GT3543LS+GH3382QD, Mountaineer GT1542+GH1382QD, and Traveler GT1555T+GH1382TQD.
Next up is the Gitzo GM2542 Monopod and Mini Traveler Tripod.
I plan to give all of them a thorough shakedown in Long Beach, WA in a couple of weeks and then in the North Cascades the week after.
That is all.
BMW doesn't make a perfect car. While certain aspects may exceed those of other makers, those others oftentimes exceed that of BMW. Despite that, the Bavarian badge commands respect and with it comes an unmistakable allure for most when they see it. It's a symbol of quality but not necessarily the best and certainly not with all products that display the marque. The Bavarian roundel holds cachet for many and that's something very hard to quantify, an intangible factor that appeals to one's emotion rather than objectivity.
So, just like what happened with the deal on the Gitzo Mountaineer GT1542 + GH1382QD kit, I got a price alert on a Gitzo Traveler GT1555 + GH1382TQD kit for 45% off the advertised price of $989. So I bought it, because I have no self control.
Some first impressions after picking up an Arca-Swiss P0 Ball Head recently.
Why? It's interesting. It's an inverted design so that the panoramic base is above the ball, ensuring a level platform for panoramic photography. Basically it eliminates the need for a leveling base. Combined with the 9oz weight, it'll reduce as much as 1.5lbs from my systematic tripod setup.
I quickly discovered the reason for the weight savings: the base of the ball head is made of polycarbonate, most likely Delrin. The rest is made from either magnesium or aluminum, depending on the part. Regarding the design, it also has no protruding parts beyond the pano lock lever. The ball lock is performed by a rotating collar around the middle of the body, resulting in a sleek design. The ball is also aspherical, a feature used across Arca-Swiss' whole line, that increases friction to prevent your camera from loosely flopping over when the ball lock is loosened. A very elegant solution to a universal issue with all ball heads.
Serious question: What’s so great about Gitzo tripods? After spending a few hours inspecting my new Gitzo GT1542 Mountaineer Series 1 tripod and GH1382QD Series 1 ball head, for every positive engineering or design decision they made, there’s an equally puzzling or outright poor one. For now, I’m going to focus solely on the knobs for the ball head. I promise I’ll focus on the other things later once I’ve gotten a better look, but the next item will be the leg angle locks.
Cleaning and lubricating your tripod, no matter what material it's made of, will extend its life. The biggest point of contention seems to be over lubrication, so here's where I'm going to attempt giving a definitive answer for most tripods and ball heads.
So, if you read my previous gear review on the Manfrotto BeFree Compact Carbon Travel Tripod, you'll understand that I needed to replace that turd quickly. This time choosing not to ignore my better judgment, I decided to give the Benro Slim Carbon Travel Tripod (TSL08CN00) a shot. This will be the third Benro tripod I've bought with my own money and while the ProAngel didn't work out after a couple of months of use, my Adventure Series 2 Carbon has held up quite well.
I only had this tripod for a week before returning it from whence I bought it. I was so thoroughly disgusted with it after receipt, then after one use, that I didn't bother to take photos of it before throwing it into its shipping container and sending it back.